QSA4S 3.5N H1 G8

QSA Series Silent Navigation Switch for SMT Features/Benefits • Excellent tactile feel • Plunger can be custom designed • SMT switch adapted for low current • Only actuate 1 direction at a time • Provides logic level control • RoHS compliant Typical Applications • Seat adjustments • Industrial controls • Mirror adjustment • Home entertainment • Multi-function steering wheel Mechanical (continued) Construction FUNCTION: TYPE OF SWITCH: FOOTPRINT: HEIGHT: PINS: ATTACHMENT: QSA2: 2 way switch QSA4: 4 way switch QSA2: 2x make contacts QSA4: 4x make contacts 23 mm x 18 mm, operating direction diagonal Housing: 9 mm, total height: 22,4 mm (H1 version) Solder pins, SMD Snap-in pegs provided to help secure and locate switches ø3,5 mm with button fastener RETURN FORCE: 0,8 ± 0,3N ACTUATION STRENGTH: >50 N, parallel to PCB >100 N, vertical (push) to PCB >50 N traction (pull) force Electrical SWITCHING POWER MAX: 0,20 VA MIN / MAX SWITCHING VOLTAGE: (VDC) 20mV / 30 V MIN / MAX SWITCHING CURRENT: 1mA / 50mA BOUNCE: < 1 ms Mechanical Environmental OPERATION DIRECTION: In X–Y direction along the diagonal axis of the switch. Rotation point is 5,5 mm over the PCB surface. TRAVEL: (H1 G8 version) Travel of the actuator measured on an axis parallel to and 19 mm above PCB. switch point/stop (4,0 N force) 1,5 ± 0,4 mm / 2,0+0,3 mm ACTUATION ANGLE: G8 version To switch point / stop (4,0 N force) 6.5˚ / 8.5˚ ACTUATION FORCE: 3,5 ± 1 N TACTILE EFFECT: 15% LIFE: 100,000 cycles in each direction (≤ 20 N force) OPERATING TEMPERATURE: STORAGE TEMPERATURE: –40˚C to 85˚C –40˚C to 95˚C Process AUTOMATIC SOLDERING: Reflow compatible per CECC00802 Other Data CONTACT MATERIAL: Au on Ni layer SOLDERING PINS: Au flash HOUSING MATERIAL: Thermoplastic NOTE: For the latest information regarding RoHS compliance, please go to: www.ittcannon.com/rohs. Note: Specifications listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center. Note: Product to be offered as compatible with the lead free soldering profile on Q3-2006. How To Order Our easy build-a-switch concept allows you to mix and match options to create the switch you need. To order, select desired option from each category and place it in the appropriate box. Q Series QSA2S QSA4S Note: * H1 ** H3 *** H4 S A 3. 5 N H 1 G 2 directions, SMT version 4 directions, SMT version Force 3.5N 3.5N (350 grams) QSA 4S only QSA 2S only QSA 4S only Actuator H1 * H3 ** H4*** Angle G7 7˚ max travel (standard for H3 and H4) G8 8˚ max travel (standard for H1) Dimensions are shown: mm (inch) Specifications and dimensions subject to change C–5 www.ittcannon.com C Navigation ACTUATOR: ! NEW QSA Series Silent Navigation Switch for SMT QSA2S H3 ø 3.86± 0.04 .6 14 1 7.5˚ 7.5˚ ø 1.6 5.5 deflection with F = 4N 15 20.7 5 ø 24 Z F 15 pivotal point 23. 5 22.7 ± 0.2 ø 3.5 ± 0.05 1 22. 7 12. 4 -0.1 1.5 0.8 3.2 +0.1 1.59 DK 5.5 15 .6 .6 +0.1 2.2 15.8 ø 1 24 5 +0.1 .2 ø1 1.59 2.6 1.8 4.9 3.4 red hole: ø 1.8 1.5 green surface: terminals and top plate fixations to be soldered with Infrared process bearing point -to keep free from PCB lines snap-in pegs and positioning pins to get through the PCB but not to be soldered 1.8 yellow surface: 5.6 2 11.67 2.54 QSA4S H1 2.54 2.54 2.54 0.2 ± 0.05 x45? 17.6 ± 0.2 15 -0.1 1 Z 5.5 15 21.1 ± 0.2 5 ø deflection with F=4N 8.5˚ 8.5˚ 0.4 F ø E 1.6 1.5 0.099 -0.1 +0.1 9 ± 0.2 5.5 20.5 ± 0.2 22.5 ± 0.2 21 pivotal point E 3.6 ± 0.2 1.7 0.8 3 2 ø 2.2 3.4 +0.1 DK .1 5.5 3.6 2.5 14.6 13 14 5 red hole: 1.2 +0 1.8 15.6 green surface: terminals and top plate fixations to be soldered with Infrared process bearing point -to keep free from PCB lines snap-in pegs and positioning pins to get through the PCB but not to be soldered 12.6 1.8 ø 1.5 yellow surface: -0.3 5:1 ø 1.2 ø Navigation 09 1.7 1.2 C 0.1 ± 0.05 0.5 1 9 ± 0.2 15.2 1 5.5 ± 0.2 ± 0.1 07 2.54 2.54 2.54 2.54 +0 .1 1 4 2.54 2.54 2.54 2.54 Dimensions are shown: mm (inch) Specifications and dimensions subject to change C–6 www.ittcannon.com QSA Series Silent Navigation Switch for SMT QSA4S H4 -0.1 5.5 21.1 ± 0.2 15 5 ø 1 15 Z 7.5˚ 7.5˚ ø 1.6 F ø 3.5 ± 0.05 type designation 0.1 ± 0.05 18.4 ± 0.2 12.5 ± 0.2 1.5 1 9 ± 0.2 17.6 ± 0.1 5.5 17.5 15.3 ± 0.2 pivotal point 0.8 12.6 ø 1.8 3.6 ± 0.1 E 1.2 DK .1 C 3 2 +0 ø2 .2 +0.1 3.4 Navigation 1.8 3.6 15.6 13 2.5 5.5 14.6 5 14 ø1 ø 1.5 .2 2.54 2.54 2.54 2.54 +0.1 1 2.54 2.54 2.54 2.54 Dimensions are shown: mm (inch) Specifications and dimensions subject to change C–7 www.ittcannon.com